Precision Digital PD6100 - Manual (Page 97)

Model PD6100 Strain Gauge/Load Cell Meter Instruction Manual
97
Display Parameter Action/Setting Description
No PtS Number of
points
Set meter for 2 to 32-point linearization
O Hold
Relays output
hold
Assign digital input to hold all relays state
OFF Off
Disable relay and front panel status LED,
turn relays off, program off time delay,
disable Tare, turn Auto-zero off
OFF 1
Off 1
Set relay 1 Off time delay (1-8)
On
On
Enable fail-safe operation, turn relays on,
program on time delay, turn on Auto-zero
On 1 On 1
Set relay 1 On time delay (1-8)
O-rang
Overrange
Program mA output for display overrange
ounCE
Ounce
Select ounce as the engineering unit
Out 1
Output 1
Program output 1 value (e.g. 4.000 mA)
Out 2
Output 2
Program output 2 value (e.g. 20.000 mA)
pass
Password
Enter the Password menu
Pass 1
Password 1
Set or enter Password 1
(Allows use of the F1–F3 function keys)
Pass 2 Password 2
Set or enter Password 2
(Allows use of the F1–F3 function keys and
changing the set/reset points)
Pass 3
Password 3
Set or enter Password 3
(Restricts all programming & F1–F3 keys)
Polar Polar
Enter unipolar or bipolar selection menu
prog Program
Enter the Program menu
Prog T Programma-
ble tare
Press Enter to set meter to programmable
tare and enter a value
range Range
Enter range selection menu
ratio Ratiometric
Press Enter to select ratiometric operation
to compensate for excitation changes.
RELaY
Relay
Enter the Relay menu
reset
Reset
Press Enter to access the Reset menu
Right Right arrow
Assign digital input to Right arrow button/F1