Precision Digital PD6100 - Manual (Page 44)

Model PD6100 Strain Gauge/Load Cell Meter Instruction Manual
44
MeterView
®
Pro Software
The meter can also be programmed using the PC-based MeterView Pro
software available for free download at www.predig.com.
Data logging for one meter at the time is available with MeterView Pro
software. More advanced data acquisition may be accomplished by
using any Modbus RTU compliant software.
In order to program the meter using a computer, the meter must be
connected using a USB, RS-232, or RS-422/485 serial adapter, see
ORDERING INFORMATION on page 7 for details.
Scaling the Meter (SCALE)
The strain gauge input (e.g. 0-100 mV) can be scaled to display the
process variable in engineering units.
A signal source is not needed to scale the meter; simply program the
inputs and corresponding display values.
For instructions on how to program
numeric values see Setting Numeric
Values
, page 34.