Precision Digital PD6100 - Manual (Page 30)

Model PD6100 Strain Gauge/Load Cell Meter Instruction Manual
30
Front Panel Buttons and Status LED Indicators
Button
Symbol Description LED Status
Menu
1-8 Alarm 1-8 indicator
Right arrow/F1
Zero Meter
1-8
M Flashing: Relay in
manual control mode
Up arrow/F2
Reset Tare
T
G Flashing: Tare (Net)
Gross
Enter/F3
Tare
1-4
Flashing: Relay
interlock switch open
Note:
Alarms 5-8 are enabled when
relay expansion module is
installed. Note:
LEDs for relays in manual mode
flash with the “M” LED every 10
seconds.
 Press the Menu button to enter or exit the Programming Mode at
any time.
 Press the Right arrow button to move to the next digit during digit or
decimal point programming.
 Press or hold the Up arrow button to scroll through the menus,
decimal point, or to increment the value of a digit.
 Press the Enter button to access a menu or to accept a setting.
 Press and hold the Menu button for three seconds to access the
advanced features of the meter.