Precision Digital PD6100 - Manual (Page 33)

Model PD6100 Strain Gauge/Load Cell Meter Instruction Manual
33
Display Parameter Action/Setting Description
RLY 2 Relay 2
Relays 2-8 setup
Note: Relays 5-8 are shown, only if
expansion relay module is installed.
FaiLSF Fail-safe
Enter Fail-safe menu
FLS 1 Fail-safe 1
Set relay 1 fail-safe operation
on On
Enable fail-safe operation
FLS 2 Fail-safe 2
Set relays 2-8 fail-safe operation
DeLAY Delay
Enter relay Time Delay menu
DLY 1 Delay 1
Enter relay 1 time delay setup
On 1 On 1
Set relay 1 On time delay
OFF 1 Off 1
Set relay 1 Off time delay
DLY 2 Delay 2
Enter relays 2-8 time delay setup
Aout
Analog output
Enter the Analog output scaling menu
Dis 1
Display 1
Program display 1 value
Out 1
Output 1
Program output 1 value (e.g. 4.000 mA)
Dis 2
Display 2
Program display 2 value
Out 2 Output 2
Program output 2 value (e.g. 20.000 mA)
reset
Reset
Press Enter to access the Reset menu
Rst Hi
Reset high
Press Enter to reset max display
Rst Lo
Reset low
Press Enter to reset min display
Rst HL
Reset
high & low
Press Enter to reset max & min displays
Rst tr Reset tare
Press Enter to reset tare
tare Tare
Enter Tare menu
Captur Capture
Press Enter to set meter to capture tare
using the Tare button
Prog T Programmable
Press Enter to set meter to
programmable tare and enter a value
Off
Off
Press Enter to disable the tare function