Precision Digital PD6100 - Manual (Page 37)

Model PD6100 Strain Gauge/Load Cell Meter Instruction Manual
37
Setting the Input Signal (Input)
Enter the Input menu to set up the input polarity, range, Ratiometric
operation, and dual-scale feature.
The meter is capable of accepting any signal from -250 to 250 mV in
bipolar mode or up to 300 mV in unipolar mode.
After selecting “Yes” or “No” for ratio, d-SCAL is displayed. Selecting
“Yes” enables the dual-scale feature, allowing scaling of the same input
in two different scales (for PV1 & PV2) or displaying the percentage of
PV1.
If Polarity (polar)
Set to Bi (bi)