Precision Digital PD6100 - Manual (Page 19)

Model PD6100 Strain Gauge/Load Cell Meter Instruction Manual
19
Connectors Labeling
The connectors’ label, affixed to the meter, shows the location of all
connectors available with requested configuration.
Warning!
Do not connect any equipment other than Precision
Digital’s expansion modules, cables, or meters to the
RJ45 M-LINK connector. Otherwise damage will occur
to the equipment and the meter.
Figure 7. Connector Labeling for Fully Loaded PD6100
Power Connections
Power connections are made to a two-terminal connector labeled
POWER on Figure 7. The meter will operate regardless of DC polarity
connection. The + and - symbols are only a suggested wiring convention.
Figure 8. Power Connections
SG- SG+
AC or DC
POWER
Required External Fuse:
5 A max, 250 V Slow Blow
POWER
+ -