Sealey TA4000 - Manual (Page 75)

75
Zoom In/Out and Drag Waveforms
The software will stop updating a waveform after the user selects the “ Stop” button,
The user can change the waveform display by adjusting the scale and position. When
you change the scale, the waveform display will increase or decrease in size. When you
change the position, the waveform will move up, down, right, or left.
The channel reference indicator identifies each waveform on the display. The indicator
points to the reference level of the waveform record.
Zoom In/Out
The user can select “ Zoom In/Out” in the “Acquire” menu, then left or right click the mouse
button on the display screen to zoom the waveform in or out . Also the user can change Time/
Div in the Horizontal menu or in the Horizontal panel to zoom the waveform in or out .
Drag
The user can modify the waveform position by selecting “ Drag” in the“Acquire” menu, and then
going through the following steps.
Original Language Version TA4000 Issue: 1 - 06/09/11