Sealey VS9201 - Manual

! DO NOT use cable ejection tools on 240V circuits, the tools are intended for use on automotive wiring
systems only.
" Ensure that the vehicle ignition is turned off before releasing connectors.
# WARNING! Use extreme caution when working near ignition coils, distributor caps, ignition wires and spark
plugs. These components create hazardous voltages when the engine is running.
" Remove personal metallic items such as rings, bracelets, necklaces and watches. A battery can produce a
short-circuit current which is high enough to weld such items to the vehicle and cause severe burns.
" Ensure that hands and clothing are clear of fan blades, belts and other moving or hot parts of engine. Remove
ties and contain long hair.
" Wear safety eye protection and protective clothing. If working near a battery avoid touching eyes.
" Wash immediately with soap and water if battery acid contacts skin or clothing. If acid enters eye, flush
eye immediately with cool, clean running water for at least 15 minutes and seek immediate medical
attention.
! DO NOT smoke or allow a spark or flame when in the vicinity of a battery or engine.
" Ensure that the cable release tools are in good condition before use. Do not use if damaged.
" Keep tools and other items away from the engine and ensure that you can see the battery and working
parts of engine clearly.
" Keep children and unauthorised persons away from the work area.
! DO NOT use the cable ejection tools for a task for which they are not designed.
WARNING: The warnings, cautions and instructions discussed in this manual cannot cover all possible conditions and situations that may occur. It must be
understood that common sense and caution are factors which cannot be built into this product, but must be applied by the operator.
INSTRUCTIONS FOR:
UNIVERSAL CABLE EJECTION TOOL SET
MODEL:
VS9201
Thank you for purchasing a Sealey product. Manufactured to a high standard this product will, if used according to these instructions and properly maintained, give
you years of trouble free performance.
1. SAFETY INSTRUCTIONS
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT
CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL
INVALIDATE THE WARRANTY. PLEASE KEEP INSTRUCTIONS SAFE FOR FUTURE USE.
2. INTRODUCTION
VS9201 - 1 - 140907
Reduce time spent on, and damage to, vehicle electrical systems with these connector tools. Set consists of cable extraction, contact ejection and contact
dismantling tools covering a wide range of connectors, including Kabelex, Micro-Timer II and III, Maxi-Power Timer and Pit-Pod. Vehicle coverage includes BMW,
Daimler/Chrysler, Fiat, Ford, MAN, Mazda, Opel, Porsche, PSA, Renault, Saab, Seat, Skoda, VAG. Supplied in blow moulded storage case.
TOOL NO. DESCRIPTION APPLICATION
CE01 (+ 11) Ejection tool for contact sizes Ø1.5mm BMW, Daimler/Chrysler, Fiat, MAN, Opel, Porsche, Seat, Skoda, VW/Audi
CE02 (+ 12) Ejection tool for contact sizes Ø3.5mm BMW, Daimler/Chrysler, Fiat, MAN, Opel, Porsche, Seat, Skoda, VW/Audi
CE05 (+ 15) Ejection tool for contact sizes Ø3.5mm Ford, Opel, PSA, Renault.
CE11 Dismantling sleeve (Use with CE01) BMW, Daimler/Chrysler, Fiat, MAN, Opel, Porsche, Seat, Skoda, VW/Audi
CE12 Dismantling sleeve (Use with CE02) BMW, Daimler/Chrysler, Fiat, MAN, Opel, Porsche, Seat, Skoda, VW/Audi
CE15 Dismantling sleeve (Use with CE05) Ford, Opel, PSA, Renault.
CE53 Cable extractor tool for plugs with BMW, Daimler/Chrysler, Ford, MAN, Opel, Porsche, PSA, Renault, Seat,
one release channel 2.8 and 5.8 Skoda, VW/Audi
CE54 Cable extractor tool for plugs with BMW, PSA, Renault
one release channel 2.8 and 5.8
CE56 Cable extractor tool MIcro-Timer II & III Daimler/Chrysler, Opel, Porsche, PSA, Renault, Saab, Seat, Skoda, VW/Audi
one release contact Ø1.6mm
CE57 For flat plug in sockets with asymmetrical Seat, Skoda, VW/Audi
latches in terminals with 2 release channels
CE58 For flat plug in sockets with asymmetrical Seat, Skoda, VW/Audi
latches in terminals with 2 release channels
CE59 Cable extractor tool for Maxi-Power Timer Daimler/Chrysler, VW/Audi
contacts 9.5mm
CE62 Cable extractor tool for Pit-Pod contacts All vehicle makes.
CE74 Cable extractor tool for Micro-Timer 1 Fiat, Ford, Mazda, Opel, PSA, Renault, Saab, VW/Audi
contacts and ABS plug-in housing Ø1.6mm
CE91 Cable extractor tool for plugs with two BMW, Daimler/Chrysler, Fiat, Ford, MAN, Opel, PSA, Renault, Saab, VW/Audi
release channels 2.8 & 5.8mm.
3. APPLICATION CHART
01284 757500
01284 703534 [email protected]
Sole UK Distributor
Sealey Group,
Bury St. Edmunds, Suffolk.
www.sealey.co.uk
Web
email
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT: No liability is accepted for incorrect use of this product.
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION: For a copy of our catalogue and latest promotions call us on 01284 757525 and leave your full name, address and postcode.