Sealey TA320 User Manual
Ta320
Table of contents
Document Outline
- TA320 manual .pdf
- User's Guide
- True RMS Industrial Multimeter
- WARNING
- CAUTION
- DC VOLTAGE MEASUREMENTS
- AC VOLTAGE (FREQUENCY, DUTY CYCLE) MEASUREMENTS
- MV VOLTAGE MEASUREMENTS
- AC CURRENT (FREQUENCY, DUTY CYCLE) MEASUREMENTS
- CONTINUITY CHECK
- /DIODE TEST
- CAPACITANCE MEASUREMENTS
- FREQUENCY (DUTY CYCLE) MEASUREMENTS (ELECTRONIC)
- AUTORANGING/MANUAL RANGE SELECTION
- MAX/MIN
- 1. Press the MAX/MIN key to activate the MAX/MIN recording mode. The display icon "MAX" will appear. The meter left auxiliary display will display and hold the maximum reading and will update only when a new “max” occurs. The display icon "MIN" will a...
- 2.To exit MAX/MIN mode press EXIT
- Relative mode
- Press the key to turn the backlight on. The backlight will automatically turn off after SET time. Press the EXIT button to exit the backlight on mode.
- Hold
- Peak Hold
- Data Storage
- Data Storage RECALL
- Clear all Data
- PC Wireless Communication
- Sending stored data to the pc
- setup
- ALARM LIMITS
- Low battery indication
- REPLACING THE FUSES