Sealey TA4000 - Manual (Page 25)

25
5. The Vertical Panel
The user can turn CH1/CH2/CH3/CH4 On or Off. Also the user can change the CH1/
CH2/CH3/CH4 volt/div, coupling and probe attenuation.
6. The Trigger Panel
In this panel, the user can change the trigger mode, sweep, source and slope.
7. Indicates system time.
8. Marker shows Edge trigger level.
9. Indicates the main time base setting.
10. Channel 4 (CH4) information
Readouts show the coupling of the channels.
Readouts show the vertical scale factors of the channels.
A “B” icon indicates that the channel is bandwidth limited.
11. Channel 3 (CH3) information
Readouts show the coupling of the channels.
Readouts show the vertical scale factors of the channels.
A “B” icon indicates that the channel is bandwidth limited.
12. Channel 2 (CH2) information
Readouts show the coupling of the channels.
Readouts show the vertical scale factors of the channels.
A “B” icon indicates that the channel is bandwidth limited.
13. Channel 1 (CH1) information
Readouts show the coupling of the channels.
Readouts show the vertical scale factors of the channels.
A “B” icon indicates that the channel is bandwidth limited.
14. S oftware status.
15. The markers show the reference points of the displayed waveforms. If there is
no marker, the channel is not displayed.
16. The same as 15.
17. The same as 15.
18. The same as 15.
Original Language Version TA4000 Issue: 1 - 06/09/11