Sealey TA4000 - Manual (Page 69)

69
+Pulse Width: Measurement of the first positive pulse in the waveform. The time between
the 50% amplitude points
-Pulse Width: Measurement of the first negative pulse in the waveform. The time between
the 50% amplitude points
4. Clear Measure
Clear all measured items on display screen.
The Measure Display Window
Note: The results of the automatic measurements will be displayed on the bottom of
the screen. A maximum of 8 results can be displayed at the same time. When there is no
room, the next new measurement result will make the previous results move left, off of
the screen.
Original Language Version TA4000 Issue: 1 - 06/09/11