Epson 1500 User Manual
Page 69
Using the optional face-up output tray, the printer does not feed
onto the face-up tray
Make sure that the paper path selector on the top left corner of
the printer is set to the face-up position. Never allow more than
20 sheets to accumulate in the face-up output tray.
Even with additional memory installed, complex pages don’t print
and INSUFF MEMORY message still appears
FULL PRINT, RX-BUFFER, or memory share ratio (the
allotment of memory per interface channel) setting of the USER
INDIVIDUAL menu in SelecType may need to be changed. See
“Memory Problems” in this chapter for more information.
You may not have installed enough memory. If you have an
ActionLaser 1000, you can add up to 6.0MB of memory for a
total of 6.5MB. If you have an ActionLaser 1500, you can add
up to 4.0MB of memory for a total of 5.0MB. If you have
installed all possible memory and the error message continues
to appear, you may have to simplify the document you are
trying to print.
Troubleshooting 3-17