Caring for cards – Epson 1500 User Manual
Page 121
The following restrictions apply when running the Epson
GL emulation using Channel S with the SelecType Level 2
USER option, AUTOSENSE setting (applies to ActionLaser
1500 users only):
1. The power-on default channel becomes Channel S.
2. Channel S cannot receive any data when another
channel is receiving data.
3. You can select Channel S only when the FEED light is
off.
The maximum number of copies you can choose in
SelecType is 99.
Caring for cards
When you use the cards. follow these precautions:
Do not drop, crush, or bend the cards. The card’s natural
curvature does not affect its operation; do not try to
straighten it.
Avoid touching the small gold connectors (contacts) along
the card’s edge.
If the card becomes dirty, clean the connectors by wiping
the edge with a clean tissue. Do not use water, alcohol, or
other solvents to clean it.
Keep the cards in their slip cases and blue antistatic bags
when you are not using them.
Do not store cards in direct sunlight or near heat sources.
They can withstand temperatures ranging from -30°C to
65°C (-29°F to 150°F) and up to 90% humidity.
Options 5-7