Epson 1500 - Manual (Page 207)

Default Settings
When the printer is initialized, the settings for the HP
emulation are reset to the values shown in the table below.
Item
Paper input
Paper size
Orientation
Copy count
Page length
VMI
HMI
Top margin
Text lines
Text length
portrait
Left margin
Right margin
Line
termination
Portrait
66 (US) or 70 (other) lines
8/48 inch (6 lines per
inch)
12/120 inch (10cpi)
1/2 inch (150 dots)
SelecType setting
SelecType setting
Depends on paper size
and orientation settings.
Page length minus 1
divided by text length
values are fixed and
depend on the
SelecType paper size
setting. The page length
and text length are
measured in inches.
Default HMI of the
selected font
1/2 inch (150 dots) when
SelecType OFFSET is 0.
60 (US) or 64 (other) lines I SelecType setting
60 (US) or 64 (other) lines
SelecType setting
Logical page left margin Logical page left margin
Logical page right Logical page right
margin margin
CR=CR, LF=LF, FF=FF CR=CR, LF=LF, FF=FF
B-30 HP Emulation Mode