Epson 1500 - Manual (Page 180)

Input paper
supply
Paper size
Epson HP LaserJet HP LaserJet
Actionlaser series IIP series III
150 sheets 70 sheets 200 sheets
400 sheets 250 sheets
(with option) (with option)
Letter Letter Letter
Legal Legal Legal
A4 A4 A4
Executive Executive Executive
Half*-letter Monarch 7-3/4 Monarch 7-3/4
B5* #10 #10
A5* DL DL
G-letter’ C5 C5
F-4*
Monarch 7-3/4
Commercial 10
DL
C5
Resident fonts Bitmap 14 Bitmap 7 Bitmap 10
Scalable 13** Scalable 8***
l
These paper sizes can be selected only with SelecType, not application
software or printer commands. See Chapter 4, ‘SelecType.’
l
* Available on the ActionLaser 1500 only.
l
** You can select only 8 of the 13 scalable fonts with an HP LaserJet Ill
driver. You can send printer commands to select the other five fonts or
use a LaserJet IllSi driver. See the printer commands later in this chapter.
The size of the printable area for the HP LaserJet series IIP and
III and this printer is the same: 50 dots within the edge of the
paper (at 300 dpi). The maximum number of characters that can
be printed per line is also the same. However, the absolute print
position may not be exactly the same as the printout from an
HP LaserJet printer.
HP Emulation Mode B-3