Epson 740 Series - Manual (Page 134)

Maintenance and Transportation Page 134
Transporting the Printer
If you move your printer some distance, you need to prepare it for
transportation in its original box. Follow these steps:
1 Turn on the printer and wait until the print head locks in the far
right position. Then turn off the printer.
2 Unplug the power cord from the electrical outlet. Then
disconnect the interface cable from the printer.
3 Remove any paper from the printer and remove the paper
support.
4 Push in the output tray extensions and close the tray.
5 Repack the printer and attachments in the original box using
the protective materials that came with it. See the
Unpacking
Sheet that was packed with your printer.
Be sure to keep the printer level as you transport it. If you notice a
decline in print quality after transporting the printer, clean the print
head (see
Cleaning the Print Head ); if output is misaligned, align
the print head (see Aligning the Print Head ).
Caution:
To avoid damage,
always leave the ink
cartridges installed
when transporting
the printer.