A-1 inverter/charger specifi cations – Magnum Energy MS-PE Series User Manual
Page 52
![background image](https://www.manualsdir.com/files/821293/content/doc052.png)
©
2013 Magnum Energy, Inc.
Page 45
Appendix A – Specifi cations and Optional Equipment
Models
MS4124PE
MS4348PE
Inverter Specifi cations
Input battery voltage range
18-34 VDC
36-64 VDC
Absolute maximum DC input
50 VDC
68 VDC
Nominal AC output voltage
230 VAC ±5% (≤ continuous power)
Output frequency and accuracy
50 Hz ± 0.4 Hz
Total Harmonic Distortion (THD)
<5%
Continuous power output (at 25° C)
4100 VA
4300 VA
Continuous AC output current (amps AC)
17.8
18.7
1 msec surge current (amps AC)
65
75
100 msec surge current (amps AC)
30
37
5 sec surge power (real watts)
6300
7500
30 sec surge power (real watts)
5300
7100
5 min surge power (real watts)
4750
6600
30 min surge power (real watts)
4600
5000
Maximum continuous input current
273 ADC
143 ADC
Inverter effi ciency (peak)
90%
91%
HBCO/HBCI (High Battery Cut Out/In)
33.8 VDC/33.2 VDC
67.6 VDC/66.4 VDC
LBCO/LBCI (Low Battery Cut Out/In)
18.0 VDC (adj)/25.0 VDC
36.0 VDC (adj)/50.0 VDC
Parallel stacking
Yes, up to 4 inverters when using the ME-RTR
AC relay transfer time (minimum)
~ 20 mSec
Power consumption - searching
9 watts
10 watts
Power consumption - inverting (no load)
30 watts
28 watts
Output waveform
Pure Sine Wave
Charger Specifi cations
Continuous charger output at 25°C
105 ADC
55 ADC
Input current at rated output (AC amps)
14
16
Charger effi ciency
88%
91%
AC input frequency range
40-60 Hz
AC input voltage range
110-268 VAC
Power factor
>0.95
General Features and Capabilities
Transfer relay capability
30 amps AC
Five-stage charging capability
Bulk, Absorb, Float, Equalize (requires remote), and Battery Saver™
Battery temperature compensation
Yes, 4.6 m (15 ft) Battery Temp Sensor standard
Internal cooling
0 to 120 cfm variable speed drive using dual 92 mm brushless DC fans
Overcurrent protection
Yes, with two overlapping circuits
Over-temperature protection
Yes on transformer, MOSFETS, and battery
Corrosion protection
PCB’s conformal coated, powder coated chassis/top, stainless steel fasteners
Safety/certifi cations
CE and C-Tick compliance when installed with MS-CEFB
Warranty
2 years, can be extended to 5 years (see Warranty)
Operating temperature
-20°C to +60°C (-4°F to 140°F)
Non-operating temperature
-40°C to +70°C (-40°F to 158°F)
Operating humidity
0 to 95% RH non-condensing
Physical Specifi cations
Unit dimensions (l x w x h)
34.9 cm x 32.1 cm x 20.3 cm (13.75” x 12.65” x 8.0”)
Shipping dimensions (l x w x h)
38.1 cm x 44.5 cm x 31.8 cm (18.5” x 17.5” x 12.5”)
Mounting
Shelf (top or bottom up) or wall
Unit weight
24.5 kg (54 lb)
Shipping weight
27.7 kg (61 lb)
Max operating altitude
4570 m (15,000’)
Specifi cations @ 25°C - Subject to change without notice.
Appendix A – Specifi cations and Optional Equipment
A-1 Inverter/Charger
Specifi cations