LOOQS MeeBox Router - Manual (Page 54)

Page 54
User Guide LOOQS MeeBox Router
Note: You cannot change the name of an existing rule.
To disable a port mapping rule
1. In the Existing Rules table, click the Edit button for the rule you want to edit.
2. Clear the Enabled check box and click Save Changes.
To delete a port mapping rule
In the Existing Rules table, click the Delete button for the rule you want to delete.
Creating and editing port triggering rules
To create a new port triggering rule
1. In the MeeBox admin interface, click Advanced Settings, then Firewall, then Port
Triggering. (See Figure 23.)
2. In the Rule name field, enter a name for the rule. (Choose a name that will help you
remember what the rule is for. Note: After you add a rule, you cannot change its
name.)
3. Next to Trigger protocol, select the communications protocol(s) that will be used by
outgoing trigger connections for this rule. If you are not sure which protocol will be
used, select both.
4. In the Trigger port(s) field, enter the port(s) to which the outgoing trigger connections
will be addressed.
5. Next to Inbound protocol, select the communications protocol(s) that will be used by
inbound connections for this rule. If you are not sure which protocol will be used, select
both.
6. In the Inbound port(s) field, enter the port(s) to which the incoming connections will be
addressed.
7. Click Add Rule.
Figure 23
Tip
If you are creating a port triggering rule for one
of the applications listed in the Presets box,
simply select the desired application, and the
form will be automatically filled with the
appropriate values.