LinPlug CrX4 - Manual (Page 57)

Library Location / Startup Patch
When you install CronoX the Library (presets consisting of the parameter
settings and the samples) are placed in a default location. On PC that is in
the same folder where you installed CronoX, on Mac it is
“/Library/Application Support/LinPlug”.
However. If you for some reason want to place the library in a different
location you can do so and point CronoX to the library manually by
choosing a preset from the new location:
Click on the Set button next to the Startup preset name and navigate to a
preset that CronoX should load upon startup. This not only defines your
initial patch that is loaded when you open a new CronoX but also defines at
which location CronoX should look for the rest of the factory library. The
path to the factory library is shown below the startup preset and you will
see how it adjusts to the startup preset when you change it.
CrX4 User Manual 57