LinPlug CrX4 - Manual (Page 41)

Stereo Enhancer
The CrX4’s Stereo Enhancer can be used to increase the width of the
instrument’s stereo image.
The Stereo Enhancer’s
Room parameter operates
somewhat like a reverb
adding depth to the sound.
This is a difficult effect to
describe so try it and see
what effect it has on the
sound.
Width increases the instrument’s stereo separation, widening the signal.
Hint: The Stereo Enhancer works best with natural stereo samples. If
applied to a signal with very strong stereo separation (for example, a signal
processed with the Ping Pong delay) the Stereo Enhancer may not widen
the stereo image but instead may narrow it.
Parametric EQ
The CrX4’s Parametric EQ (Equalizer) effect contains 2 independent
parametric equalizer stages in series.
The Freq (Frequency) control
sets the frequency at which
the EQ operates. A range of
20 Hz to 11.000 Hz is
available.
The Gain control sets the
amount of gain that is applied
to the selected frequency. Note that the gain can be positive or negative. A
positive gain corresponds to boosting the signal while a negative gain
corresponds to cutting the signal. A range of -18 dB to +18 dB is available.
The Q (Quality) controls set the bandwidth of the filter. A large value means
that a wider bandwidth is affected.
CrX4 User Manual 41