KACO Powador-protect - Manual (Page 9)

Page 9
A
3.2 Mechanical data
Interfaces
Measurement Screw terminals 4-pin (L1/L2/L3/N)
Switch contacts
2 changeover contacts for connecting
external tie circuit-breakers
Ripple control receiver Screw terminals, 5-pin
to the inverter
Screw terminals for
digital output, RS485-Bus.
RJ45 socket for RS485
Connection terminals
Length of insulation to be
stripped off
8 mm
Tightening torque 0.5 ... 0.6 Nm
Conductor cross-section
1 conductor, rigid,
no wire sleeves
0.2 ... 4.0 mm²
1 conductor, flexible,
no wire sleeves
0.25 ... 2.5 mm²
2 conductors, rigid/flex-
ible,
no wire sleeves
0.2 ... 1.5 mm²
2 conductors, flexible,
with wire sleeves
0.25 ... 0.75 mm²
General mechanical data
Display LCD (2 x 16 characters), 3 LEDs
Controls 2 control buttons, 1 release test
Mounting Top-hat rail or wall mount