KACO Powador-protect - Manual (Page 18)

Page 18
A
7 Electrical connection
Make the electrical connection via the screw terminals on the top of
the device. Use a slot screwdriver (max. blade width: 3 mm).
You will require the following additional materials that are not
included with the powador-Protect:
• Connection material, wire sleeves if necessary
• suitable fuses
The use of the digital inputs and outputs is country-specific. Note the
relevant instructions.
7.1 General information
The integrated power supply is designed for a supply voltage of 100
- 264 V
AC
.
You can use AC or DC supplied tie circuit-breakers.