KACO Powador-protect - Manual (Page 22)

Page 22
A
↻ Make AC connection.
Use suitable fuses!
� Connect AC measuring lines
(L1, L2, L3) and neutral conduc-
tor N to the relevant screw
terminals (L1, L2, L3, N)
21 22 14 11 12 N L3 L2 L1 A2 A1
RS485B RS485A GND RS485B RS485A GND CAN H CAN L GND CAN H CAN L GND
D01 GND DI4 DI3 DI2 DI1 24 21
J1J2J3J4
L1
L2
L3
N
L1
L2
L3
N
Figure 6: AC supply and
AC measuring lines
(with wire jumper)
8 Connecting the interfaces
Connect the interface lines via the screw terminals to the upper and
lower side of the device.
DANGER
Risk of fatal injury due to electric shock
Severe injury or death will result if the live connections are
touched.
› Before all work, ensure that there is absolutely no volt-
age present.
8.1 Connect tie circuit-breakers
Germany,
User defined
NOTE
With exclusive use of suitable Powador inverters in the
generation plant being monitored, no external tie
circuit-breakers are required.