KACO Powador-protect - Manual (Page 31)

Page 31
A
8.4.3 Activate connection resistance (optional)
Activate the terminating resistor if the Powador-protect represents
the terminal unit within your wiring layout. Jumpers are included
with the device for this purpose.
Applications Connection assign-
ment
Jumpers
Case 1:
Terminal,
RS485 master
a)
b)
� Insert 3 jumpers in accordance with diagram.
Case 2:
Terminal,
RS485 slave
a)
b)
� Insert jumpers in accordance with diagram.
Case 3:
Bus subscriber,
slave
� Do not insert jumpers.
8.5 Fitting the ferrite clip
1. Place the ferrite clip supplied around the connection leads for
ripple control receiver and/or digital output.
2. Close the ferrite clip.