Yaskawa iQpump Controller User Manual - Manual (Page 62)

3.4 Drive Main Menu
62 YASKAWA TM.iQp.06 iQpump Controller User Manual
3.4 Drive Main Menu
The iQpump drive’s parameters and monitoring functions are organized into menu groups that make it easier to read and set parameters.
The iQpump drive is equipped with five menu selections. The five selections and their primary functions are shown in Table 3.7 and are
directly available by pressing the MENU key.
Table 3.7 iQpump Drive Menu Selections
Main Menu Primary Function(s)
Operation
- DRIVE -
The drive can be run in this menu.
Use this menu for monitoring values such as frequency reference or output current, displaying fault history or displaying the
fault traces.
Pump Quick Setup
- QUICK -
The drive can be programmed in this menu.
Use this menu to set / read the most commonly used parameters.
Programming
- ADV -
The drive can be programmed in this menu.
Use this menu to set / read every parameter.
Modified Constants
- VERIFY -
The drive can be programmed in this menu.
Use this menu to set / read the parameters that have been modified from their factory default settings.
Auto-Tuning
- A.TUNE -
The drive can be programmed in this menu.
Use this menu to auto-tune the drive in order to optimize motor control as well as utilize the bi-directional speed search feature.