Yaskawa iQpump Controller User Manual - Manual (Page 20)

1.2 Confirmations Upon Delivery
20 YASKAWA TM.iQp.06 iQpump Controller User Manual
◆ Drive Model Numbers
The model number on the nameplate indicates the design specification, voltage, and rating of the iQpump drive in alphanumeric codes.
Figure 1.2 iQpump Drive Model Number Structure
◆ Drive Enclosure and Revision Code
The iQpump drive SPEC number on the nameplate indicates the voltage, iQpump drive rating, enclosure type, and the revision code of
the iQpump drive in alphanumeric codes.
Figure 1.3 SPEC Number Structure
TERMS TERMS TERMS
Open Chassis Type (IEC IP00)
Protected so that parts of the human body cannot reach electrically charged parts from the front when
the iQpump drive is mounted in a control panel, also called (protected chassis).
TERMS TERMS TERMS
NEMA Type 1 (IEC IP20)
The iQpump drive is shielded from the exterior, and can thus be mounted to the interior wall of a
building (not necessarily enclosed in a control panel). The protective structure conforms to the
standards of NEMA Type 1 in the USA. All protective covers (Fig 1.4) must be installed to conform
with IEC IP20 and NEMA Type 1 requirements
No. Spec
UL Specification
CIMR – P7 U 2 0 11*
AC Drive
U
No. Voltage
2
4 3-phase, 208-240 Vac
3-phase, 480 Vac
Rating
iQpump Family
* YEA Item #: CIMR-P7U20111A-107
2 011 1 A U890107
No.
2
4
Voltage
3-phase, 208 - 240 Vac
3-phase, 480 Vac
No. Enclosure Type
0 Open chassis (IEC IP00)
1 NEMA Type 1 (IEC IP20)
Hardware Revision
Rating
VAU Number