Yaskawa iQpump Controller User Manual - Manual (Page 58)

3.1 Digital Operator Display
58 YASKAWA TM.iQp.06 iQpump Controller User Manual
3.1 Digital Operator Display
The digital operator is used for programming, operating, and monitoring iQpump drive operation. By default, the iQpump drive will not
run unless the digital operator is securely attached to the iQpump drive.
The various items included on the digital operator are described below.
Figure 3.1 Digital Operator Component Names and Functions
WARNING
The digital operator can be used to operate (start) the iQpump drive. Incorrect programming and / or improper key
selection on the digital operator may result in the iQpump drive starting unexpectedly. Prior to making any adjustments
with the digital operator, insure that all personnel are clear from the iQpump drive, motor, and machine. Also, insure that
all covers, couplings, pulleys, shaft keys, etc. are secure.
Drive Mode Indicators
See Table 3.2
Data Display
Displays monitor data, parameter numbers and settings
Key Descriptions
See Table 3.1
RUN & STOP Indicators
See Tables 3.5 and 3.6
Ready Display
Drive can operate when a drive command is input
1 line x 13 characters
3 lines x 16 characters
Menu Display
See Table 3.7