SMA STP 10000TL-10 Installation - Manual (Page 51)

SMA Solar Technology AG 6 Electrical Connection
Installation Manual STP10-17TL-IA-en-32 51
6.5.3 Setting the Country Standard and Language Using the
Rotary Switch
1. Disconnect the inverter (see Section 9 "Disconnecting the Inverter from Voltage Sources",
page 61).
2. Set the arrows on the rotary switches (A and B)
to the required position using a screwdriver
(see Section 6.5.1 "Checking the Country
Standard", page 46). Use a screwdriver with
blade width 2.5 mm.
3. Restart the inverter (see Section 7 "Commissioning", page 56).
Jumper for English language
You can also adjust the language to English by
means of a jumper (e.g. for service purposes).
• To do so, plug the jumper onto the upper two
pins as shown on the right.