SMA STP 10000TL-10 Installation - Manual (Page 38)

6 Electrical Connection SMA Solar Technology AG
38 STP10-17TL-IA-en-32 Installation Manual
Procedure
1. Lead the stripped cable all the way into the plug.
2. Push the clamping bracket down.
☑ The clamping bracket clicks audibly into place.
3. Ensure that the cable is correctly positioned:
Result Measure
☑ If the stranded wire is visible in the
chamber of the clamping bracket, the
cable is correctly positioned.
• Proceed to step 4.
☑ If the stranded wire is not visible in the
chamber, the cable is not correctly
positioned.
• Release the clamping bracket.
To do so, insert a screwdriver into the
clamping bracket and lever it open
(blade width: 3.5 mm).
• Remove the cable and go back to step 1.