SMA SB 6000TL‑US Installation - Manual (Page 69)

SMA America, LLC 10 Decommissioning
Installation Manual SB6-11TL-US-IA-en-13 69
10. Remove both screws on the left and right side of the
DC Disconnect that attach it to the wall mounting
bracket.
10.2 Packaging the Sunny Boy
• Pack the Sunny Boy and DC Disconnect. Use the original packaging or packaging that is
suitable for the weight and dimensions of the inverter.
10.3 Storage
Store the Sunny Boy and the DC Disconnect in a dry place. The ambient temperature must be between
− 40°F ( − 40°C) and +140 °F +60°C).
10.4 Disposal
• Dispose of the Sunny Boy and the DC Disconnect in accordance with the disposal regulations
for electronic waste that apply at the installation site.
or
• Send the Sunny Boy and the DC Disconnect to SMA carriage paid (see Section
14 "Contact", page 90). When doing so, label the packaging with the information
"FOR DISPOSAL".