SMA SB 6000TL‑US Installation - Manual (Page 38)

5 Electrical Connection SMA America, LLC
38 SB6-11TL-US-IA-en-13 Installation Manual
8. Tighten the cables with a torque of 40 in-lb. (4.5 Nm).
9. Check that all terminals have the correct wiring and that the cables are secure.
10. Close the DC Disconnect as described in Section 8.4 "Closing the DC Disconnect", page 59.
11. Close the Sunny Boy as described in Section 8.2 "Closing the Sunny Boy", page 56.
☑ The AC cables are now connected.
7. Connect the red insulated conductor to the terminal
labeled L2.