SMA SB 6000TL‑US Installation - Manual (Page 49)

SMA America, LLC 7 Displays and Messages
Installation Manual SB6-11TL-US-IA-en-13 49
Feed-in operation
The following display messages will be given consecutively after the start phase.
• The energy generated today and the actual
operating state.
• The current feed-in capacity and PV voltage.
• The total energy produced and the time that the
inverter has been connected to the grid.
Disturbance
If an error occurs, the LCD switches backlight on.
• If a disturbance occurs, the message "Disturbance"
will be shown in the lower line.
• The exact error message is displayed.
• If an unreliable measurement has caused the
disturbance, the value measured at the time of the
disturbance is displayed in the upper line.
• If another measurement of the value is possible, the
latest measured value is displayed in the second
line.
E-Total 724.4kWh
h-total 512h
E-today 0Wh
Mode Disturbance