SMA SB 6000TL‑US Installation - Manual (Page 56)

8 Opening and Closing SMA America, LLC
56 SB6-11TL-US-IA-en-13 Installation Manual
8.2 Closing the Sunny Boy
☐ Cables must not obstruct the seal of the enclosure lid.
☐ The enclosure lid must not exert any pressure on the connections.
☐ All 6 screws with conical spring washers for attaching the enclosure lid are available.
☐ The seal in the inside of the lid must be undamaged and in the correct position.
1. Mount the enclosure lid onto the Sunny Boy.
The 6 holes in the cover must be aligned with the
6 thread bores of the enclosure.
Damage to the enclosure lid can affect the seal between the enclosure lid and the
enclosure
There may be an ingress of moisture.
Potential damage to the Sunny Boy.
• Handle the enclosure lid with care.
• Check the seal on the inner side of the enclosure lid for damage.
• When closing, no moisture may remain in the enclosure.