SMA SB 6000TL‑US Installation - Manual (Page 68)

10 Decommissioning SMA America, LLC
68 SB6-11TL-US-IA-en-13 Installation Manual
10 Decommissioning
10.1 Dismantling the Sunny Boy and the DC Disconnect
1. Open the Sunny Boy as described in Section 8.1 "Opening the Sunny Boy", page 55.
2. Remove all cables connected to the Sunny Boy.
3. Close the Sunny Boy as described in Section 8.2 "Closing the Sunny Boy", page 56.
4. Open the DC Disconnect as described in Section 8.3 "Opening the DC Disconnect", page 58.
5. Remove all cables connected to the DC Disconnect.
7. Remove both screws on the left and right side of the
Sunny Boy that attach it to the wall mounting
bracket.
8. Remove the Sunny Boy vertically upwards from the
wall mounting bracket.
9. 2 people must transport the Sunny Boy using the
side handles at the top and bottom.
or
Feed a steel rod with a maximum diameter of
1
1
⁄
8
in. (30 mm) through the enclosure openings at
the top. 2 people must transport the Sunny Boy.
6.
The Sunny Boy may fall down due to inappropriate disassembly.
Contusions or bone fractures due to the heavy weight of the Sunny Boy.
• Prior to disassembling the Sunny Boy, take its weight of 77 lb. (35 kg) into account.
• Use suitable lifting technique when disassembling.