Emerson FM-3 - Manual (Page 95)

81
Setting Up Parameters
Input Lines View
The Input Lines View displays any functions that have been assigned to the drive or module
hardware inputs. See Figure 49.
Note
No assignments can be made using the Input Lines View, assignments are only displayed
in the Input Lines View.
Figure 49: Input Lines View
Two functions can be performed on the Input Lines view.
Name
You can assign a descriptive name to each input and make the setup easier to follow. The
length of the text string is limited by the column width with a maximum of 12 characters.
Simply double click on the Name field of any input line to assign a name to it.
Debounce
You can program a “Debounce Time” to any input line, which means the motion profile will
need to be steady for at least the debounce time before it is recognized. This feature helps
prevent false triggering in applications in noisy electrical environments. At the end of the
debounce time, the next action can occur.