Emerson FM-3 - Manual (Page 199)

185
Installation
Software Installation
PowerTools Pro software was designed for users who need access to all setup options and
diagnostic information for the drive. The software provides access to all commonly used drive
parameters.
PC System Configuration
Required:
• Microsoft® Windows® 98, Microsoft® Windows NT® 4.0 (service pack 3), Microsoft®
Windows XP (Home and Pro) and Microsoft® Windows 2000
• Serial port
• Mouse
• CD-ROM drive
• Microsoft® Internet Explorer v 4.0 or greater
Recommended:
• 16 MB or more RAM for Windows 98, 32 MB or more for Windows NT and Windows
2000 and 64MB or more for Windows XP.
• Up to 45 MB of hard disk space required for a full installation; 15 MB for minimum
installation.
Optional:
• Windows-compatible printer
• Modem and Internet access
Preparing for PowerTools Pro Installation
• Close all programs and turn off virus protection software to prevent installation conflicts.
• If you have another version of PowerTools on your computer and do not want to overwrite
that version, change the default installation folder for PowerTools during installation
setup.
• To avoid overwriting programs you have customized or created, place them into a
separate folder before you install.
Installing PowerTools Pro
You must be running Microsoft Windows 98, Microsoft Windows NT 4.0, Microsoft
Windows 2000 or Microsoft Windows XP to install this software.
1. Insert the Power CD into the CD-ROM drive. The Power CD should auto start, navigate
to the software page where the PowerTools Pro installation link will be found. If the