Emerson FM-3 - Manual (Page 194)

180
FM-3 Programming Module Reference Manual
Percent Continuous
TorqueUnits.PercentContinuousCurrent
This parameter is the denominator of torque scaling factor. This is an amount of continuous
current in percent that is equal to the TorqueUnits.Torque parameter.
Torque
TorqueUnits.Torque
This parameter is the numerator of the torque scaling factor. This is an amount of torque in
Torque User Units that is equivalent to one unit of PercentContinuousCurrent (denominator
of scaling factor). This scaling factor is used to relate actual current or torque to user units.
Variable Decimal
Var.Var#.Decimal
This parameter specifies the number of decimal placed of resolution that this particular user
variable will use. Minimum value is 0 (default), and the maximum number of decimal places
in 6 (0.000000). When assigning the value of a User Variable to different parameters, make
sure that the parameter and the User Variable have the same number of decimal places.
Variable Value
Var.Var#.Value
This parameter specifies the current value of a user variable. In a program, the ".Value"
portion of the parameter name can be left off. For example:
Var.Var0.Value = 12345 is the same as Var.Var0 = 12345
When assigning the value of a User Variable to different parameters, make sure that the
parameter and the User Variable have the same number of decimal places.
Velocity Command
VelCommand
The Velocity Command is the velocity that the FM-3 module is commanding the motor to run
at. This command is generated by the drive velocity control loop. It is displayed in user units.
Velocity Feedback
VelFeedback
This is the feedback (or actual) velocity. It will always return the actual motor velocity, even
in synchronized applications in which the master axis is halted during a move.