Eagle Electronics SeaChamp 2000 - Manual (Page 80)

72
Reset Options
This command is used to reset all features, options and settings to their
original factory defaults. This is useful when you have changed several
settings and want to return the unit to basic automatic operation.
1. Press MENU | MENU |
↓ to
S
YSTEM
S
ETUP
| ENT |
↓ to
R
ESET
O
PTIONS
| ENT .
2. Press ← to Y ES
| ENT .
3. All the menus are cleared and the unit reverts to the Map Page at
the 4000-mile zoom range, just as if you had turned it on for the first
time. All options have been returned to the factory settings.
System Setup menu with Reset Options command selected (left). The
Reset Options dialog box (right).
NOTE:
Reset Options does not erase any waypoints, routes, plot trails, or
sonar logs.
Reset Water Distance
The sonar chart's Digital Data display option includes a window that
shows distance traveled, called Water Distance ("W Distance"). This
information is calculated from an optional water speed sensor, not the
GPS. The Water Distance window can be reset to zero using the Reset
Water Distance command.
Press MENU | MENU |
↓ to
S
ONAR
S
ETUP
| ENT |
↓ to
R
ESET
W
ATER
D
ISTANCE
| ENT . The menus are cleared and the water distance is reset to
0.00.
Set Keel Offset
This unit measures water depth from the face of the transducer. Since
the transducer is installed below the water surface, the depth displayed
by the digital depth, chart depth scale, chart cursor and fish symbols