Eagle Electronics SeaChamp 2000 - Manual (Page 11)

3
Capabilities and Specifications: FishStrike 2000C &
SeaChamp 2000
C DF
General
Display:............................ 6.4" VGA color LCD".
Resolution:...................... 640 pixel x 480 pixel resolution.
Backlighting:.................. Fluorescent cold cathode backlit screen with
multiple lighting levels; backlit keypad.
Input power:................... 10 to 15 volts DC.
Current drain: ............... Sonar only: 500 ma lights off; 600 ma lights
on. With GPS and lights on: 700 ma.
Case size:......................... 7.3" H x 9.6" W x 3.7" D (18.5 x 24.4 x 9.4
cm); sealed and waterproof; suitable for
saltwater use.
MMC slots: ...................... Two in waterproof compartment (SD card
compatible).
Back-up memory: .......... Built-in memory stores sonar records and
GPS data for decades. User settings are
stored when unit is turned off.
Languages:...................... 10; menu languages selectable by user.
Sonar
Frequency:...................... Depending on transducer, either 50/200 kHz
dual-frequency (SeaChamp 2000C DF only)
or 200 kHz single-frequency.
Transducers: .................... Skimmer

transducer with built-in
temperature sensor available. Use either a
dual-frequency transducer with 35
°/12° cone
angles (SeaChamp 2000C DF only) or a single-
frequency transducer with a 20
° cone angle.
Both transducers operate at speeds up to 70
mph (61 kts).
Transmitter: ................... Dual-frequency: 8,000 watts peak-to-
peak/1 kW RMS (SeaChamp 2000C DF).
Single-frequency: 3,000 watts peak-to-
peak/375 watts RMS (FishStrike 2000C).
Sonar sounding
Depth capability:........... Dual-frequency: 3,000 feet (915 meters).
Single-frequency: 1,000 feet (305 meters).
Actual capability depends on transducer
configuration and installation, bottom
composition and water conditions.