Mounting the unit: bracket or in-dash – Eagle Electronics SeaChamp 2000 User Manual
Page 41
33
Mounting the Unit: Bracket or In-Dash
You can install the unit on top of a dash with the gimbal bracket. It can
also be installed in the dash or mounted on a portable power supply.
If you use the supplied bracket, you may be interested in the optional
R-A-M
bracket mounting system. This converts the unit's gimbal
bracket to a swivel mount, which can be used on the dash or overhead
mounting positions.
Optional R-A-M mounting system.
Bracket Installation
Mount the unit in any convenient location, provided there is clearance
behind the unit when it's tilted for the best viewing angle. You should
also make sure there is enough room behind the unit to attach the
power, transducer and GPS antenna/receiver module cables. (A
drawing on the next page shows the dimensions of a gimbal-mounted
unit.)