Eagle Electronics SeaChamp 2000 - Manual (Page 177)

169
Find Highway Exits command (left) and Find Exit menu (right).
2. Select a highway name by pressing ENT , which calls up the F IND B Y
N
AME
menu. There are two highway search options : A. You can spell out
the highway name in the top selection box. Press
↑ or ↓ to change the
first letter, then press → to move the cursor to the next letter and
repeat until the name is correct, then press ENT | ENT. B. Or jump down
to the lower selection list by pressing ENT, then press
↓
or
↑
to select a
highway from the list and press ENT.
Find By Name menu.
3 . Once you have selected a highway name you can then choose an exit.
Press ↓ to switch to the exit list, then use
↓ or ↑ to highlight the exit
and press ENT.