Eagle Electronics SeaChamp 2000 - Manual (Page 183)

175
Map Page showing results of a street search.
The cursor points to the located street.
Find an Intersection
You must enter one street in the First Street dialog box and enter the
next street in the Second Street dialog box.
1. From the Map Page, press MENU | ↓ to F
IND
S
TREETS
| ENT and the F
IND
S TREETS
menu appears .
2. You must fill in a street name in the First Street dialog box. Press
ENT to display the F IND B Y N AME
menu. There are two options : A. You can
spell out the street in the top selection box. Use ↑ or ↓ to change the
first letter, then press → to move the cursor to the next letter and
repeat until the name is correct and press ENT | ENT. B. Or you can jump
down to the lower box and pick a street from the list. Press ENT, then
use ↓ or ↑ to select a street from the list and press ENT.
3. The Find Streets menu reappears with the street you're searching for
in the First Street box.
4. Now fill in the second street. Press ↓ to S
ECOND
S
TREET
| ENT and the
F
IND
B
Y
N
AME
menu appears again. Just like before, there are two
options : A. You can spell out the second street in the top selection box.
Press ↑ or ↓ to change the first letter, then press → to move the cursor
to the next letter and repeat until the name is correct, then press
ENT | ENT. B. Or you can jump down to the lower box and pick the
second street from the selection list. Press ENT, and use ↓ or ↑ to select a
street from the list and press ENT.
5. The Find Streets menu reappears with the first and second street
dialog boxes filled in. In this example, we selected 71st Street as our