Eagle Electronics SeaChamp 2000 - Manual (Page 49)

41
Main Menu
The unit has a Main Menu, which contains some function and setup
commands. The instructions in this section will deal only with sonar
functions, the basic commands that make the unit show sonar signals
on your screen. This unit will work fine right out of the box with the
factory default settings. But, if you want to learn about the various
sonar options, see Sec. 4, Sonar Options & Other Features. (For general
system setup and GPS options, see Sec. 8, System Setup and GPS Setup
Options.)
You can access the Main Menu from any of the four Page screens by
pressing
MENU | MENU . To clear the menu screen and return to the page
display, press EXIT . (Remember, our text style for MENU | MENU means
"press the Menu key twice." See a full explanation of our instruction
text formatting on page 9, Instructions = Menu Sequences.)
Main Menu.
The Main Menu commands and their functions are:
Screen: changes the contrast or brightness of the display.
Sounds: enables or disables the sounds for key strokes and alarms and
sets the alarm style.
Alarms: turns GPS alarms on or off and changes alarm thresholds.
Route Planning: used to plan, view or navigate a route.
My Trails: shows, creates and deletes plot trails. Also used to navigate
or backtrack a trail.
Cancel Navigation: ends navigation. Used to stop navigating after
you have reached your destination.
Sonar Setup: sets various sonar options.
GPS Setup: sets various GPS receiver options.