Eagle Electronics SeaChamp 2000 - Manual (Page 150)

142
To correct this problem, Track-up Mode rotates the map as you turn.
What you see on the left side of the screen should always be to your left,
and so on.
Another option is course-up mode, which keeps the map at the same
orientation as the initial bearing to the waypoint. When either the
track-up or course-up mode is on, a "N" shows on the map screen to
help you see which direction is north.
To change map orientation : from the Map Page, press MENU |
↓ to
M
AP
O RIENTATION
| ENT . Use
↑ or ↓ to select the desired mode, then press
ENT .
Press EXIT | EXIT to return to the page display.
Map Orientation menu with the North Up map option selected (right).
Navionics

Charts
Your unit can display Navionics

electronic charts on MMCs. They
work just like a MapCreate custom map on a MMC.
Entrance to Chesapeake Bay in a MapCreate 6 custom map with a 15-
mile zoom (left). The same position on Navionics chart at
10-mile zoom (center) and with a 5-mile zoom (right).
Display a Navionics chart:
1. Install the Navionics MMC in the memory card compartment and
turn on the unit. (For full card install instructions, see Sec. 2.)