Hyperscroll, Log sonar chart data – Eagle Electronics SeaChamp 2000 User Manual
Page 73
65
Sonar Features menu with a frequency of 200 kHz selected.
To change the frequency setting to 50 kHz:
1. From the Sonar Page, press
MENU
|
↓ to
S
ONAR
F
EATURES
|
ENT
.
2. Press
↓ to
50
K
H
Z
|
ENT
.
3. Press
EXIT
|
EXIT
to clear the menu.
To change the frequency setting to 200 kHz:
1. From the Sonar Page, press
MENU
|
↓ to
S
ONAR
F
EATURES
|
ENT.
2. Press
↓ to
200
K
H
Z
|
ENT
.
3. Press
EXIT
|
EXIT
to clear the menu.
HyperScroll
See the entry on Ping Speed, which controls the HyperScroll feature.
Log Sonar Chart Data
If you have an MMC installed in the unit, the sonar data shown on the
screen can be saved and played back at any time. (To play a recorded
sonar chart log, see the entry in this section for Sonar Simulator.) If
you have a personal computer and internet access, download our free
Sonar Viewer and your unit’s emulator at our web site,
www.eaglesonar.com. That will allow you to replay sonar logs on
your personal computer.