Eagle Electronics SeaChamp 2000 - Manual (Page 69)

61
2. The Depth Range Control Scale appears. Press
↑
or
↓
to select a
different depth range. A blue bar highlights the selected range. The
shaded numbers can not be selected.
3. When the new range is selected, press EXIT to clear the menu.
Depth Range - Manual
You have complete control over the range when the unit is in the
manual mode. There are 16 depth ranges, from 5 to 4,000 feet.
To switch to Manual Depth Range:
1. Turn off automatic depth range. From the Sonar Page, press MENU | ↓
to A
UTO
D
EPTH
R
ANGE
| ENT .
2. Press
↑ to
D
EPTH
R
ANGE
| ENT and the Depth Range Control Scale appears.
3. Press
↓ or ↑ to select a different depth range. A blue bar highlights
the selected range.
4. When the new range is selected, press EXIT to clear the menu.
NOTE:
The sonar's depth capability depends on the transducer
installation, water and bottom conditions among other factors.
FasTrack

This feature automatically converts all echoes to short horizontal lines
on the display's far right side. FasTrack gives you a rapid update of
conditions directly under the boat. This makes it useful for ice fishing,
or fishing at anchor. When the boat is not moving, fish signals are long,
drawn out lines on a normal chart display. FasTrack converts the graph
to a vertical bar graph that, with practice, is useful when fishing at a
stationary location.
Sonar Page showing FasTrack.
Surface clutter
Structure
Colorline
Bottom signal
Fish arches
FasTrack,
fish arches
show as
horizontal
bars.
FasTrack
bar graph