Epson PhotoPlus - Manual (Page 16)

Getting Started 1-3
A
B
1
NOTE
If you connect your printer and PhotoPlus scanner to the same
computer port, make sure the printer is turned on when you
scan.
1 If you have a printer connected to your computer’s
parallel port, unplug it.
2 Plug the PhotoPlus parallel connector into your
computer’s parallel port as shown to the right, and
tighten the screws.
NOTE
If you have a low-profile computer, the parallel connector
may not fit in your port. You may need to use an extender
connector, which you can purchase at any computer store.
:
3 Plug the power adapter into the power socket on the
PhotoPlus parallel connector. On some computer
models, you may need to arrange the adapter plug
to fit around your monitor cable.
PhotoPlus parallel
connector
parallel
port
power
adapter
power socket
php_1.fm5 Page 3 Monday, July 8, 1996 3:05 PM