Tool selection – HEIDENHAIN iTNC 530 (340 49x-02) Pilot User Manual
Page 35
35
D
e
fining Machining O
p
erations
Tool selection
As soon as an input field in the tool selection is active, you can choose
via soft key (
1
) if you want to enter the tool number or tool name.
There is also a soft key (
2
) for calling a window from which you can select
a tool defined in the tool table TOOL.T. smarT.NC then automatically
writes the tool number or name of the selected tool into the
corresponding input field.
You can also edit the displayed tool data:
8
Use the arrow keys to select the line and then the column of the value
to be edited: The light-blue background marks the editable field
8
Set the EDIT soft key to ON, enter the desired value and confirm with
the ENT key.
8
If needed, select further columns and repeat the described procedure
1
1
1
2