HEIDENHAIN iTNC 530 (340 49x-02) Pilot User Manual
Page 119
119
Defining
Mach
ining
Posit
io
ns
Single point, Cartesian
8
X:
Coordinate in the reference axis of the working plane
8
Y:
Coordinate in the minor axis of the working plane
Single row, straight or arced
8
Starting point 1st axis:
Coordinate of the starting point
of the row in the reference axis of the working plane.
8
Starting point 2nd axis:
Coordinate of the starting point
of the row in the minor axis of the working plane.
8
Distance:
Distance between the machining positions. You
can enter a positive or negative value.
8
Number of repetitions:
Total number of machining
positions.
8
Rotation:
Angle of rotation around the entered starting
point. Reference axis: Major axis of the active machining
plane (e.g. X for tool axis Z). You can enter a positive or
negative value.