HEIDENHAIN ND 1400 - Manual (Page 36)

22 QC-300 Series User’s Guide
Projection
The projection button shows the active 2D or 3D projection plane or coordinate system.
Touching the projection button displays a drop down menu of available 2D projection
planes or 3D coordinate systems that can be selected. Auto instructs the system to choose
the projection plane or coordinate system that best matches the current measurement
activities.
Unit of measure
The unit of measure button toggles the linear unit of measure between metric and Eng-
lish. Touch the mm/in button to toggle the units of measure.
Setup
The setup button provides access to the system setup screens required for configuring QC-330
measurement and operation. Touch the setup button to display the setup screens. Access to the
setup menu is given through two introductory screens that show the software version, the system
options and a caution regarding the use of setup functions.
Setup screen tools will be made available to those who can provide a valid supervisor password.
NOTE
Detailed descriptions of all setup functions and tools are contained in
Chapter 10: Setup.